C –80
grade Hardened and Tempered Spring Steel Strips.
These strips are stocked in different width, finish
and different hardness range between 40 50 HRC
(Std. Size of Hardened and Tempered Spring Steel
Strips) in Grey, Bright polished, Blue polished
surface finish.
Chemical Composition:
C: 0.75 - 0.90%
Mn: 0.50 - 0.90%
Si: 0/1 - 0.35
S&P: 0.04% Max
These strips can be sheared with low burrs to
customer’s width requirements. On request and short
lead time tailor made Strips can be produced as per
customers requirement of hardness, width surface
finish & different edges. Please check for Minimum
economic batch quantity & lead time.
Standard Sizes of Hardened and Tempered Spring Steel
Strips.
|
Size |
Hardness |
Surface Finish |
End Use |
| 235 x 3.0 mm |
42-44 |
Grey |
|
| 311 x 2.60 mm |
42-44 |
Bright |
|
| 330 x 2.00 mm |
44-47 |
Bright & Grey |
|
|
190 x 2.00 mm
|
44-47 |
Bright |
|
| 152.4 x 2.00 mm |
48-50 |
Bright |
|
| 152.4 x 1.80 mm |
48-50 |
Bright |
|
| 152.4 x 1.60 mm |
44-47 |
Bright |
|
| 152.4 x 1.50 mm |
48-50 |
Bright |
|
| 152.4/ 127 x 1.40 mm |
44-47 |
Bright |
|
| 152.4/127 x 1.20 mm |
44-47 |
Bright |
|
| 152.4/200 x 1.00 mm |
44-47 |
Bright |
|
| 152.4 x 0.90mm |
44-47 |
Bright |
|
| 200/152.4 x 0.80mm |
44-47 |
Bright |
|
| 152.4 x 0.70mm |
44-47 |
Bright |
|
| 165 x 0.60mm |
44-47 |
Bright & Blue |
|
| 101.6 x 0.55 mm |
44-47 |
Bright & Blue |
|
| 152.4/101.6 x 0.50 mm |
44-47 |
Bright |
|
| 101.6 x 0.50 mm |
44-47 |
Blue |
|
| 152.4 x 0.45 mm |
44-47 |
Bright |
|
| 101.6 x 0.45 mm |
48-50 |
Blue |
|
| 150 x 0.40 mm |
48-50 |
Bright |
|
| 101.6 x 0.40 mm |
48-50 |
Blue |
|
| 150 x 0.30 mm |
48-50 |
Bright |
|
| 101.6 x 0.30 mm |
48-50 |
Blue |
|
| 150 x 0.25 mm |
48-50 |
Bright |
|
| 101.6 x 0.25 mm |
48-50 |
Blue |
|
| 150 x 0.20 mm |
48-50 |
Bright |
|
| 101.6 x 0.20 mm |
48-50 |
Blue |
|
These strips are widely used for making Coil
Springs, Rulers, Saws, Masionery tools, Jungle
tools,Saw Steel, Steel for Springs, Steel for
mansonary tools and Spring Steel parts which do not
require severe bending or forming.
This grade compares well with
AISI 1080/1085
CK 75/80
HC-14/EN42J, DIN 17200
JIS-S 80C & Sup 3
To
place an order or For more details kindly Contact
Us
|
